DC 12V-30V 200W Three-Phase BLDC Motor Controller Hall Sensor 10KHz PWM Driver Forward Reverse

DC 12V-30V 200W Three-Phase BLDC Motor Controller Hall Sensor 10KHz PWM Driver Forward Reverse XY-BLDC Three-Phase Hall BLDC Motor Controller 1.Descriptions:XY-BLDC is a 200W Three-Phase Hall BLDC Motor Controller. It supports PLC 0-5V analog signal control and PWM to 0-5V control. 2.Features:1>.Three-Phase hall sensor control 2>.Drive 200W high power BLDC motor 3>.Forward and reverse control switching 4>.0-5V analog signal 3.Parameters: 1>.Product name:XY-BLDC Three-Phase Hall BLDC Motor Controller 2>.Model:XY-BLDC 3>.Working Voltage:DC 12V-30V 4>.Rated Current:7A 5>.Peak Current:10A 6>.Drive Power:200W 7>.BLDC Motor angle:120degree(Max) 8>.Over current protection:Yes 9>.Forward and reverse control:Yes 10>. control:Yes 11>.PWM control:Yes 12>.Analog signal control:Yes 13>.Work Temperature:-40℃~85℃ 14>.Work Humidity:0%~95%RH 15>.Module Size:80*30*12mm 4.Input/Output Signal: 1>.PWM input signal:The amplitude of PWM is 5V. Recommended PWM frequency is 1KHz-10KHz. Input form ‘PWM’ interface. 2>.Analog input signal:Analog signal is 0-5V. User can connect a 10K-100Kohm potentiometer between ‘NA’ and ‘GND’ interface. 3>.Forward and reverse control:It needs stop before change the direction of motor rotation.It is strictly forbidden to change the direction during the motor rotation, which will cause damage to the circuit board. Selection of motion state by on board jump cap. It can also be connected with other buttons or control signals. 4>.Output 5V voltage from ‘5V’ and ‘GND’ interface.But its maximum output current is about 10mA. 5>.Pulse signal output.Its output amplitude is 5V.Each pulse represents one revolution of the motor. It can measure the rotational speed of the motor. 6>.Interface J1 : It is used to connect Three-Phase BLDC Motor. 7>.Inter

• DC 12V-30V 200W Three-Phase BLDC Motor Controller Hall Sensor 10KHz PWM Driver Forward Reverse